Sensors

Light sensors

P/N 9553
– Power supply: passive sensor
– Current draw: 0.25 mA
– Installation: flush mount
– Connection: Screw down clamps
– Dimensions: 18.5x32x10 mm
– Compatibility: Flexì

Electronic device for the detection of brightness, to be connected as an input of any 95XX module. The device allows the constant regulation of the lighting of the room.

Current meters

P/N 9558
– Measuring range: 0-32A
– Power supply: Passive sensor
– Current draw: 0.2 mA
– Installation: Flush mount
– Connection: Screw down clamps
– Dimensions: 18.5x32x10 mm
– Max wire diameter: max 10 mm
– Compatibility: Flexì

The current meter is a current sensor that can be connected to an input of any module 95XX. It measures by TA the AC current that passes through a wire without interrupting it.

Temperature sensors

P/N 14300
– Power supply: Passive sensor
– Current draw: 0.2 mA
– Installation: Flush mount
– Connection: Screw down clamps
– Dimensions: 1 module
– Compatibility: Flexì and Flat

The sensor measures the temperature and allows the control of the heating and cooling system of the house. It can be connected as an input of any 95XX module.

Card reader

P/N 14304
– Power supply: 10 – 15 Vdc
– Current draw: 70 mA
– IP rating: IP50
– Max number of readers: 10
– Compatibility: Flexì

Electronic card reader for access control. It is equipped with 2 LEDs and an acoustic signal and can be installed as a module in the Flexì series. To be used in combination with P/N 9820.

Electronic keys coding board

P/N 9820
– Power supply: 10 – 15 Vdc
– Current draw: 50 mA
– Maximum current for the output relay: 3A at 24Vdc
– Maximum number of keys that can be programmed: 127

Decoding board for electronic keys. It can store up to 127 keys and can be simply configured with a DIP switch.

Electronic key/card

P/N 9817 (card) – P/N 9816 (key)
– Card dimensions: 96x64x1 mm

Electronic card/key to be used with P/N 9820.