Bus modules

Bus adapter

P/N 9510
– Power supply: 20-28 Vdc (24Vdc nominal)
– Current draw: 12 mA
– Installation: DIN rail
– Dimensions: 2 DIN – 35.5x90x66 mm

Bus adapter: it is a polarization device for the data line. It monitors the traffic on the bus and the presence of the 24Vdc power supply. It is used for programming and scanning a system and to connect the Bridge, P/N 9595 to the bus modules.

6in/6out LED module

P/N 9521
– Inputs: 6 analog/digital
– Outputs: 6 N.A. (open collector) 24Vdc 2.4mA
– Power supply: 20-28 Vdc (24Vdc nominal)
– Output tension: 5/24 Vdc
– Current draw: 15 mA
– Installation: wall box 2/3M
– Connection: Screw down clamps and wires 0.5mm2 20cm
– Dimensions: 42x40x10 mm

Miniaturized module suitable to be installed in boxes. The device has 6 inputs freely programmable as digital or analog and 6 outputs suitable to control small indication LEDs or the 16A relays of P/N 14303.

Modulo 3in/2out 6A

P/N 9522
– Inputs: 3 analog/digital
– Outputs: 2 relays (6A 250VAC/30VDC)
– Power Supply: 20-28 Vdc (24Vdc nominal)
– Current draw: 25 mA
– Installation: wall box 2/3M
– Connection: Screw down clamps
– Dimensions: 40x55x15 mm

Minuaturized module suitable to be installed in 2/3M wall boxes. The device has 2 relay outputs freely programmable, suitable for connecting lights or motors.

4in/4out 16A module

P/N 9535
– Inputs: 4 analog/digital
– Outputs: 4 relays (16A 250VAC/30VDC)
– Power Supply: 20-28 Vdc (24Vdc nominal)
– Current draw: 100 mA
– Reports: 4 relay status LEDs
– Installation: DIN rail
– Connection: Screw down clamps
– Dimensions: 4 DIN – 72x90x63 mm

This module is suitable to be installed in panels or boxes with a DIN rail. The device is equipped with four 16A 250Vac/30Vdc relays which can be controlled by analog (sensors) or digital (push buttons, switches, etc..) inputs.

4in/1out 500W module

P/N 9530
– Inputs: 4 analog/digital
– Outputs: 1 dimmer (220-240Vac/500W)
– Power supply: 20-28 Vdc (24Vdc nominal)
– Current draw: 30 mA
– Reports: 1 status LED
– Installation: DIN rail
– Connectiono: Screw down clamps
– Dimensions: 4 DIN – 72x90x63 mm

This module is suitable to be installed in racks or boxes with a DIN rail. The device is equipped with 1 dimmable output and 4 inputs that can be configured as either analog or digital. An internal relay disconnects the power circuit and the load connected to it when the adjustment reaches the minimum. The module allows an energy saving proportional to the dimming of the lamps.

4in/3out PWM module

P/N 9531
– Inputs: 4 analog/digital
– Outputs: 3 – with PWM control
– Power supply: 20-28 Vdc (24Vdc nominal)
– Current draw: 11 mA
– Reports: status LED for the module
– Installation: DIN rail
– Connection: Screw down clamps
– Dimensions: 4 DIN – 72x90x63 mm

This module has 4 inputs that can be configured either as analog or digital. It is suitable to be installed in racks or boxes with a DIN rail. The device has 3 PWM outputs which can control LED lights, LED RGB strips and any type of load that can work with a PWM type of control. For each output channel the maximum tension difference with respect to the neutral is 28Vdc.